WmClass Web Master Class Paylaşım Platformu WM Mobil Dünyası Akıllı Telefonlar & Tablet v Titanium is the perfect metal to make replacement human body parts
Titanium is the perfect metal to make replacement human body parts
Titanium is the perfect metal to make replacement human body parts
  • Derecelendirme: 0/5 - 0 oy
  • 1
  • 2
  • 3
  • 4
  • 5
Konuyu Okuyanlar:1 Ziyaretçi
Şuan Offine!
Şuan Offine!
DS2343sd Yeni Üye
Yeni Üye
  • Konular9
  • Mesajlar9
  • Rep puanı 0
Titanium is the perfect metal to make replacement human body parts

    Titanium is the perfect metal to make replacement human body parts


    Titanium material is expensive and can be problematic when it

comes to traditional processing technologies. For example, its high melting point (1,670℃, much higher than steel

alloys) is a challenge.

    The relatively low-cost precision of 3D printing is therefore a game-changer for titanium. 3D printing is where an object

is built layer by layer and designers can create amazing shapes.

    This allows the production of complex shapes such as replacement parts of a jaw

bone, heel, hip, dental implants, or cranioplasty plates in surgery. It can also be used to

make golf clubs and aircraft components.

    The CSIRO is working with industry to develop new technologies in 3D printing using titanium. (It

even made a dragon out of titanium.)

    Advances in 3D printing are opening up new avenues to further improve the function of customised bodypart

implants made of titanium.

    Such implants can be designed to be porous, making them lighter but allowing blood, nutrients and nerves to pass through

and can even promote bone in-growth.

    Safe in the body

    Titanium is considered the most biocompatible metal – not harmful or toxic to living tissue – due to its resistance to

corrosion from bodily fluids. This ability to withstand the harsh bodily environment is a result of the protective oxide film

that forms naturally in the presence of oxygen.

    Its ability to physically bond with bone also gives titanium an advantage over other materials that require the use of an

adhesive to remain attached. Titanium implants last longer, and much larger forces are required to break the bonds that join

them to the body compared with their alternatives.

    Titanium alloys commonly used in load-bearing implants are significantly less stiff – and closer in performance to human

bone – than stainless steel or cobalt-based alloys.

    Aerospace applications

    Titanium weighs about half as much as steel but is 30% stronger, which makes it ideally suited to the aerospace industry

where every gram matters.

    In the late 1940s the US government helped to get production of titanium going

as it could see its potential for “aircraft, missiles, spacecraft, and other military purposes”.

    Titanium has increasingly become the buy-to-fly material for aircraft designers striving to develop faster, lighter and

more efficient aircraft.

    About 39% of the US Air Force’s F22 Raptor, one of the most advanced fighter aircraft in the world, is made of


    Civil aviation moved in the same direction with Boeing’s new 787 Dreamliner made of 15% titanium, significantly

more than previous models.

    Two key areas where titanium is used in airliners is in their landing gear and jet engines. Landing gear needs to

withstand the massive amounts of force exerted on it every time a plane hits a runway.

    Titanium’s toughness means it can absorb the huge amounts of energy expelled when a plane lands without ever weakening.

    Titanium’s heat resistance means it can be used inside modern jet engines, where temperatures can reach 800℃. Steel

begins to soften at around 400℃ but titanium can withstand the intense heat of a jet engine without losing its strength.

    Where to find titanium

    In its natural state, titanium is always found bonded with other elements, usually within igneous rocks and sediments

derived from them.

    The most commonly mined materials containing titanium are ilmenite (an iron-titanium oxide, FeTiO3)

and rutile (a titanium oxide, TiO2).

    Ilmenite is most abundant in China, whereas Australia has the highest global proportion of rutile, about 40%

according to Geoscience Australia. It’s found mostly on the east, west and southern coastlines of Australia.

    Both materials are generally extracted from sands, after which the titanium is separated from the other minerals.

    Australia is one of the world’s leading producers of titanium, producing more than 1.5 million tonnes in 2014.

South Africa and China are the two next leading producers of titanium, producing 1.16 and 1 million tonnes, respectively.

    Being among the top ten most abundant elements in Earth’s crust, titanium resources aren’t currently under threat –

good news for the many scientists and innovators constantly looking for new ways to improve life with titanium.

    Titanium Forgings Shapes

    Titanium forgings refer to products

manufactured by the process of shaping metal utilizing compressive forces. The compressive forces used are generally

delivered via pressing, pounding, or squeezing under great pressure. Although there are many different kinds of forging

processes available, they can be grouped into three main classes:

    Forging produces pieces that are stronger than an equivalent cast or machined part. As the metal is shaped during the

forging process, the internal grain deforms to follow the general shape of the part. This results in a grain that is

continuous throughout the part, resulting in its high strength characteristics. Forgings are broadly classified as either

cold, warm or hot forgings, according to the temperature at which the processing is performed.

    Iron and steel are nearly always hot forged, which prevents the work hardening that would result from cold forging. Work

hardening increases the difficulty of performing secondary machining operations on the metal pieces. When work hardening is

desired, other methods of hardening, most notably heat treating, may be applied to the piece. Alloys such as aluminum and

titanium that are amenable to precipitation hardening can be hot forged, followed by hardening. Because of their high

strength, forgings are almost always used where reliability and human safety are critical such as in the aerospace,

automotive, ship building, oil drilling, engine and petrochemical industries.

    For more information or to receive a prompt aluminum price quote, please contact us at 800 398-4345 or submit the Request

Information form on the right side of this page.

    Titanium rod and bar are made from a

corrosion-resistant material that has one of the highest strength-to-weight ratios of all metals. Due to the wear resistance,

corrosion resistance, high-temperature resistance, and non-magnetic properties of titanium rods, it is used in the main parts

of equipment, shaft body, solid parts, mixing shaft, etc.

    Titanium Rods’ Characteristics

    In addition, titanium rods have the characteristics of high strength, good toughness, low modulus of

elasticity, compatibility with the human body, and are widely used in the medical industry.

    The forging material of the titanium rod is mainly pure titanium and titanium alloy of various compositions, and the

original state of the material is titanium rod, titanium ingot, metal powder, and liquid metal.

    The ratio of the cross-sectional area of the metal before deformation to the cross-sectional area after deformation is

called the forging ratio. Proper selection of forging ratio, reasonable heating temperature and holding time, reasonable

initial forging temperature, and final forging temperature, reasonable deformation, and deformation speed is closely related

to improving product quality and reducing cost.

    Generally, small and medium-sized forgings use round or square bars as blanks. If the grain structure and mechanical

properties of the bar are uniform and good, the shape and size are accurate, and the surface quality is good, it is

convenient for mass production. As long as the heating temperature and deformation conditions are properly controlled, high-

quality forgings can be forged without requiring large forging deformation.

    On the aircraft, titanium alloy is mainly used to manufacture the main force members such as girders, landing

gears, hubs, and joints. Titanium alloy is mainly used to manufacture adapter rings, scraper fans, compressor discs, and

blades on the engine.

    In the metalworking world, every metal part possesses its own unique set of benefits. No matter what industry

you’re in, it’s important to know the benefits of different metal components so that you can choose the part that

will be the most valuable for your specific project. One metal part that is used in various industries for it’s advantages

is titanium tubing! What are the benefits of titanium tubing? Keep reading to find out!

    4 Benefits of Titanium Pipe and Tube

    1. Lower Density

    The density of Titanium pipe and tube is

significantly lower than steel, copper, or nickel products. Despite their low density, they are very strong and rigid when

compared to other alloy components.

    2. Resistant to Corrosion

    Another benefit of utilizing titanium tubing is that titanium alloys are resistant to corrosion. This makes these

tubes an appealing option if you need a part to work efficiently in a highly corrosive environment.

     3. Resistant to Chemicals

     Corrosion is not the only thing that titanium tubes are resistant to. They are also resistant to chemicals. These

titanium parts can withstand different chemical compounds while still preforming effectively.

     4. Great Heat Transfer Properties

    Titanium tubes have great heat transfer properties thanks to its thermal conductivity and resistance. The same

can’t be said for copper and carbon steel tubes. Their resistance to heat also allows them to work successfully at

temperatures up to 600 degrees or higher.

    These are just a few of the many benefits that come from utilizing titanium tubes. Because of these benefits, you can

find titanium tubing in countless important industries such as power generation, sporting goods, marine, nuclear, and paper


    If you’re interested in using titanium tubes for your next project, Ferralloy, Inc. can help! We also have the

infrastructure and facilities to supply raw materials in numerous grades and forms! Visit our metalworking foundry

online today!


    Titanium is sliver grey, colored transition metal found in abundance among all minerals. Titanium has high melting point

and offers very good corrosion resistant property, heat properties and strength to weight ratio. Titanium is extracted from

ores of rutile and ilmenite. Aerospace & aviation industry is the major end user of the titanium product.

    Titanium is used in production of super light high speed aircrafts, satellites and spacecrafts, and ships. Apart from

aerospace & aviation, some other major end user industries of titanium

include paper, plastic, and paints & coatings.

    Titanium products are also popular in various healthcare applications such as pacemakers, and defibrillators due to

chemical properties of titanium such as inertness to UV rays and self-cleaning properties.

    Based on the different product type, the global titanium products market can be broadly categorized as titanium

concentrate, titanium tetrachloride, titanium sponge, ferrotitanium, titanium pigment and other. Based on the various

applications of the titanium product, the market can be segmented in seven broad categories namely, aerospace & marine,

industrial, medical, energy, pigments, additives & coatings, and others.

    Rising demand of titanium products in aircraft carriers, defense equipments and various other chemical processing

industries such as oil and gas is driving the global titanium product market. Moreover, the recent development in cost

effective manufacturing technology coupled with superior weight-to strength ratio compare to some of the other traditional

product such as steel is expected to boost the market in upcoming years.

     Unavailability of raw material, fluctuating price of input materials, and high cost of titanium product are some of

the major challenge for the titanium product market.

    North America is the largest market of titanium product followed by the Europe and Asia pacific. Asia Pacific is the

fasted growing market. The major end user industry such as healthcare, power, automotive and aerospace industries of the

titanium product is growing which in turns helping the titanium product market in this region.

    Some of the major companies operating in global titanium products market include, Huntsman International, DuPont, Ineos,

Iluka Resources Ltd., Sumitomo Corporation VSMPO-AVISMA Corporation., Toho Titanium Co., Ltd., RTI International Metals,

Allegheny Technologies Incorporated, Titanium Metal Corporation., Tronox Limited (U.S)., Indian Rare Earths Limited (India).,

and Sierra Rutile Limited (U.K)


    Titanium is a well-known material to be characterised as flammable under certain morphologies. Titanium and its alloys

have a great affinity for oxygen and will form a native 2-7 nm TiO2 layer instantly if a clean metallic surface is

exposed to air at room temperature. This film prevents further oxidation from taking place and protects the underlying metal

powder. When heat is applied, either through a thermal source or a spark, the powder can generally or locally heat to the

point of thermal runaway or burning. The consensus mechanism of self-sustaining thermal runaway of titanium powder occurs by

means of ion diffusion through this native TiO2 film on the titanium powder [1, 2]. As the micron size of the powder

decreases, the specific surface area (in units of m2/g) increases at a rate of 6/d where d=particle diameter. In context, to

fill a typical AM machine with 45 kg of titanium powder, with an average particle size of 20 μm, this powder will have

enough surface area to cover over 3000 m2. Generally, titanium powders with a particle size < 45 μm are considered a

flammability hazard.

    When describing a reaction of any metal powder, there are three categories into which each reaction may fall: 1)

&nbsp;stagnant, 2) freely aspirated and 3) conveyed. Stagnant powder reactions generally are a result of powder that collects

on a horizontal surface and ignition is typically from a heat source, as a more significant source is necessary to ignite a

stagnant bed of powder. When powder is dispersed in the air, the fine powders may stay aloft creating a cloud. Aspiration of

powder, and specifically titanium powder, does not automatically mean the cloud will ignite spontaneously. However, if the

temperature threshold or spark energy necessary for ignition is met, rapid oxidation of powder can occur as it mixes with

oxygen from the air. This is a result of no thermal heat sink of other powders or materials in near proximity to the powder

cloud allowing it to reach a much higher temperature and propagate to other powders, which may result in a large pressure

increase and possible explosion.

    Ignition can come from a variety of sources, which will be discussed throughout this article. Thermal exposure to

temperatures of 300-700°C can cause ignition of titanium powder despite the native oxide layer (i.e., minimum ignition

temperature or MIT). Spark ignition can come from a variety of sources including static electricity build-up, electric

components and friction/impact of metal components. Titanium powder can have minimum (spark) ignition energies (MIE) of 3-30


    Powder production

    After atomisation, Titanium powder is

traditionally collected in a cyclone system. These powders are typically non-passivated. The transfer of these non-passivated

powders from the atomisation cyclone to ancillary process containers is considered to present a high risk of thermal runaway,

which may require breaking of the inert gas seal and exposure to oxygen with high potential for powder aspiration. To

overcome this problem, non-passivated powder requires exposure to air (or a reactive gas) to passivate at room temperature, a

very time consuming and potentially dangerous process. As an example, passivation of 215 kg of aluminium powder was conducted

in a powder collection canister after atomisation, requiring a 20 hour cool down (below MIT), followed by a 1.5 hour

passivation period [3]. While canisters can be isolated and moved for passivation, this process concentrates a large quantity

of nascent surface powders (i.e. highly reactive) in a confined vessel, which is not ideal.

    A novel passivation approach

    As a solution to this problem, Praxair Surface Technologies, Inc. uses a novel in-situ passivation process that prevents

further oxidation of the powder during exposure to air, thus minimising any exothermic reaction, thereby greatly diminishing

the possibility of thermal runaway or burning of powder. Using Praxair’s in-situ process, titanium powders are passivated

prior to reaching the cyclone collection and are deemed safe to handle after dropping below the aforementioned MIT (300-700°

C in air). This not only increases the productivity of titanium powder production, but also greatly diminishes the hazards of

the powder.

    The ability to add a specific passivation layer to the titanium powder without greatly affecting the powder making

process requires the formation of an oxide shell in-situ after the powders initially solidify and descend downwards within

the atomisation chamber. The most important aspect of in-situ passivation is the generation of a layer similar (in thickness

and chemistry) to the native oxide film that will form on the surface of titanium at room temperature (i.e., a 2-7 nm thick

oxide) [4-7]. Oxide thickness becomes extremely important because of the extremely large surface area described above.

Ideally, the total oxygen content should stay below 1300 ppmw (0.13&nbsp;wt.%) for a 20 μm particle, which requires a target

titanium oxide thickness of ~2-3 nm if the bulk material contains less than 1000 ppmw of O2. If the target oxide shell

thickness of 1-3 nm can be produced then no additional oxidation should take place when exposed to air at room temperature

for extended periods of time.

    The post-processing of titanium powder undoubtedly will utilise electrical equipment from sieves, blenders, feeders, etc.

This challenge also presents itself to users of AM equipment. When considering electrical installations involving any

flammable substance, it is highly recommended to reference National Electrical Code, NFPA 70, particularly articles 500 to

504. These sections describe the recommended best installation practices for electrical equipment in the presence of a

hazardous material. Class II is relevant to combustible dusts (e.g., metal powders) and, within Class&nbsp;II locations,

there are Divisions I and&nbsp;II. To determine which division a process/material may fall into, the reader is directed to

read these descriptions carefully.

Konu ile Alakalı Benzer Konular
Konular Yazar Yorumlar Okunma Son Yorum
  Intelligent Mining Technology for an Underground Metal Mine Based on Unmanned Equipme E234B 0 70 18-09-2021, Saat: 05:38
Son Yorum: E234B
  Everything You Wanted To Know About Titanium DS2343sd 0 80 25-08-2021, Saat: 07:00
Son Yorum: DS2343sd
  The Methods of Distinguishing the Quality of Crusher Wear Parts MK22ssw 0 79 23-08-2021, Saat: 10:18
Son Yorum: MK22ssw

Hızlı Menü: